Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Kraton D1101 KU - SBS - Kraton Polymers

Material Data Center offers the following functions for Kraton D1101 KU:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Kraton D datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Product Texts
Kraton D1101 K is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%.
Kraton D1101 KU - supplied as an undusted porous pellet.
Processing/Physical CharacteristicsValueUnitTest Standard
Other Standards[S]
Melt flow index, MFI 1 g/10min
Temperature 200 °C -
Load 5 kg -
S: These properties are reported by the producer according standards that are different to our defaults.
Mechanical propertiesValueUnitTest Standard
ASTM Data
Modulus at 300% Elongation 2.76 MPa ASTM D 412
Shore A Hardness 69 - ASTM D 2240
Tensile Strength 31.7 MPa ASTM D 412
Elongation at Break 880 % ASTM D 412
Other propertiesValueUnitTest Standard
Other Standards[S]
Density 940 kg/m³ ASTM D 4025
S: These properties are reported by the producer according standards that are different to our defaults.
Characteristics
Processing
Coating
Delivery form
Pellets
Special Characteristics
Transparent
Features
Copolymer
Chemical Resistance
Oxidation Resistance
Regional Availability
North America, Europe, Asia Pacific, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.